Plant and equipment
You can get an idea of what kind of equipment and tool Mark has by checking some of the variables that are listed below.Not all tools are for display due to intellectual property securities.
Enough to see the a small snap shot of the development of some of the specific tools designed for a range of simple to complex applications.
The following equipment data is supported below:
Roadsaw / floor saw diesel, petrol, electric
100 HP saw 0-700mm depth, deeper on application
65 HP saw 0-650mm depth
45 HP saw 0-450/550mm depth some machines are able to go deeper
30 HP saw 0-300mm depth
27 HP saw 0-200mm depth
40 HP Electric 3phase saw 0-500/550mm depth
Slotting/ Milling For a Conduit
Slotting widths available
10mm, 14/15mm, 20/25mm, 30/45/56mm wide
Enquire if your milled slot is different or not identified above
Wall Saw /Track Saws
Wall saw /Track saw max depths 400mm – 1100mm
Different machines, have varying operating designs limits
These machines have the ability to be set at various angles not achieved by other standard cutting machines
Wire Saws
Wire saws/cable saws varying due to size, storage capacities and applications suitable.
Cutting depth unlimited
Chain Saw
Chainsaws Max depth 700mm one side
Ring saws standard 270mm of depth
Unique tools for wall or floor based penetrations.
Special tapered CORE hole cutting
Complex tooling with design benefits
900mm diameter – 3000mm diameter to prevent core dropping
***It really is a tool requiring a site inspection and information, to identify what is possible and what are your requirements
Core drilling
Various drives;
single ph/3phase/ Hydraulic
this is to suit, inverted, horizontal, vertical, wet areas or sensitive environments, limited access
Additional engineering for this tooling allows the following
Any angle is or specifically required can be accommodated, due to other design features engineered to achieve
FYI Various sized cores
Small bores 12mm – 25mm diam
26mm – 50mm diam
63/75/82/89/100/115/125/150/165/175/200/210/225/250/275/300/325/350/400/450mm/ diameter tubes
500/600/700/800/900/1000mm diameter tubes
Greater/larger diameters on design and application, eg custom diameters are no longer a concern, eg; 1160-1500/1580mm diameter x 2mtrs deep
Customised/engineered tools for varying penetrations, wall, floor, & suspended works etc.
Tools are also engineered to suit unusual applications or specific constraints
Over the years many different machines have been constructed and developed to be more readily suitable to suit 1off difficult applications.
Send the enquire slip noted below, noting photos and details of your application
Gallery Images
